(11) Take off the jam access cover.
(12) Disconnect the connector and remove the
harness.
(13) Remove 2 screws and take off the right
transport guide.
Note:
When taking off the right transport guide, be
careful not to come off the bypass transport
guide and the spring together with it.
(14) Release the latch and take off the lower
drawer feed sensor.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Jam access cover
Fig. 9-436
Harness
Fig. 9-437
Bypass transport guide
Screw
Fig. 9-438
Right transport
guide
Fig. 9-439
9 - 19
e-STUDIO350/352/353/450/452/453
Connector
Spring
Screw
Right transport guide
Lower drawer feed
sensor
PAPER FEEDING SYSTEM
9