Toshiba e-STUDIO453 Service Manual page 80
Hide thumbs
Also See for e-STUDIO453:
- Service handbook (764 pages) ,
- Operator's manual (362 pages) ,
- Printing manual (356 pages)
Table of Contents
Advertisement
(3) Release the Latches and take off the front
lower cover of the hole punch unit.
2
2
(4) Remove 1 screw and slide the lever to the
front side.
(5) Take off the finisher.
Note:
When moving the finisher unit by itself, be
careful that it does not topple over.
(6) Remove 1 screw and take off the mainte-
nance cover.
(7) Disconnect 1 connector.
e-STUDIO350/352/353/450/452/453
OUTLINE OF THE MACHINE
Fig. 2-677
Fig. 2-678
Fig. 2-679
Fig. 2-680
2 - 60
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
05/11
Advertisement
Table of Contents
