Output Control Circuits Of High-Voltage Transformer; Overview; Description Of Operations - Toshiba e-STUDIO453 Service Manual

11.3 Output Control Circuits of High-Voltage Transformer

11.3.1 Overview

• Generate the output control voltage Vc of the main charger, transfer/separation charger, transfer
guide bias and developer bias.
• Convert Vc  The current is output linearly.

11.3.2 Description of operations

Adjustment
value
NVRAM
IC32
LGC board
• Outputs the adjustment value of the main, transfer and separation chargers, developer bias and
transfer guide bias in the NVRAM to the ASIC GA.
↓
• Outputs the control voltage data from the ASIC GA to the D/A converter.
↓
• Converts to the analog data by the D/A converter.
↓
• Outputs the control voltage Vc to the main, transfer and separation chargers, developer bias and
transfer guide bias transformer.
↓
• The main, transfer and separation chargers, developer bias and transfer guide bias transformer gen-
erate output current or voltage which is proportional to the control voltage Vc.
* Adjustment of the control voltage Vc (change of adjustment data) is performed in the adjustment
mode (05).
* The output value of the transfer guide bias is fixed when the high-voltage transformer is shipped
from the factory.
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Digital
ASIC data
D/A
GA converter
IC2
IC38
Fig. 11-301
 - 5
04/01
HVT board
Main/
transfer/
separation/
Vc
Analog
chargers,
developer
bias and
transfer
guide bias
e-STUDIO350/352/353/450/452/453
DRUM RELATED SECTION
Output
11