4.7
Others
[A] Hinge stopper
(1)
Remove 1 screw and then take off the hinge
stopper.
Note:
Note:
When the hinge stopper is taken off, the
opening angle for the RADF becomes
approx. 90 degrees. Take off the hinge stop-
per only when it is needed for installation,
maintenance service, etc.
MR-2017/2020
DISASSEMBLY AND ASSEMBLY
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 30
Hinge stopper
Fig. 4-82
Fig. 4-83