Toshiba MR-2017 Service Manual page 50

[C] Jam access cover sensor (S7)
(1) Open the jam access cover.
(2) Remove 1 screw and take off the metal plate
cover.
(3) Disconnect 1 connector. Release 2 latches
and take off the jam access cover sensor.
[D] Original empty sensor (S3)
(1) Open the jam access cover.
(2) Remove 1 screw and take off the metal plate
cover.
MR-2017/2020
DISASSEMBLY AND ASSEMBLY
Jam access cover sensor
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 24
Metal plate cover
Fig. 4-67
Fig. 4-68
Metal plate cover
Fig. 4-69