Toshiba MR-2017 Service Manual page 45

[D] Read motor drive section
(1) Take off the rear motor.
( P. 4-18 "[C] Read motor (M2)")
(2) Remove 1 spring. (Spring: Outside diameter
of coil –ø8.8 mm, active coils – 12.5)
(3) Release the harness from 2 harness clamps.
(4) Remove 3 screws and then take off the
bracket.
(5) Take off 1 timing belt and 4 bushings.
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Spring
Harness clamp
Fig. 4-54
Fig. 4-55
Timing belt
Bushing
Fig. 4-56
4 - 19
07/06
Harness clamp
Bracket
Bushing
MR-2017/2020
DISASSEMBLY AND ASSEMBLY
4