4.4
Solenoid
[A] Original pickup solenoid (SOL)
(1)
Take off the original feed motor drive section.
(
P. 4-17 "[B] Original feed motor drive
section")
(2)
Disconnect 1 connector. Remove 2 screws
and take off the original pickup solenoid with
the bracket.
(3)
Remove 2 screws and take off the original
pickup solenoid from the bracket.
Note:
Note:
When installing the original pickup solenoid,
be sure to align the edge of the original
pickup solenoid with the mark-off line on the
frame.
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Connector
Original pickup solenoid
Fig. 4-58
Fig. 4-59
Mark-off line
Fig. 4-60
4 - 21
Original pickup solenoid
Bracket
MR-2017/2020
DISASSEMBLY AND ASSEMBLY
4