Toshiba MR-2017 Service Manual page 33

(3) Slide the pulley and remove 1 pin.
(4) Pull out the shaft and take off the feed roller.
Note: Note:
Make sure you assemble the feed roller with
the one-way clutch in the correct direction.
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-19
Shaft
Fig. 4-20
Lock
Fig. 4-21
4 - 7
Pin
Pulley
Feed roller
Lock
MR-2017/2020
DISASSEMBLY AND ASSEMBLY
4