Toshiba MR-2017 Service Manual page 46

(6) Loosen 1 screw of the belt tensioner.
(7) Remove the 4 E-rings, and then take off the
4 pulleys and timing belt.
Note: Note:
When the unit is being assembled, first install
the parts removed at steps (3), (4), (5) and
(7), and attach the spring removed at step (2)
next. Then tighten the screw loosened at
step (6).
MR-2017/2020
DISASSEMBLY AND ASSEMBLY
E-ring
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 20
07/06
Screw
Tensioner
Timing belt
Fig. 4-57