Toshiba MR-2017 Service Manual page 32

[B] Pickup roller [PM]
(1) Take off the paper feeder unit.
( P. 4-5 "[A] Paper feeder unit")
(2) Remove 1 clip and pull out the shaft. Take off
the pickup roller.
Notes:
1. Be careful not to drop the pin because it
will come off when the shaft is pulled out.
2. Make sure you assemble the pickup roller
with the one-way clutch in the correct
direction.
[C] Feed roller [PM]
(1) Take off the paper feeder unit.
( P. 4-5 "[A] Paper feeder unit")
(2) Remove 1 clip.
MR-2017/2020
DISASSEMBLY AND ASSEMBLY
Clip
Lock
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 6
Shaft Pin
Pickup roller
Fig. 4-16
Lock
Fig. 4-17
Clip
Fig. 4-18