Spartan-6 Xc6Slx45T-3Fgg484 Fpga; Configuration - Xilinx SP605 User Manual

Chapter 1: SP605 Evaluation Board
Table 1-1: SP605 Features (Cont'd)

1. Spartan-6 XC6SLX45T-3FGG484 FPGA

A Xilinx Spartan-6 XC6SLX45T-3FGG484 FPGA is installed on the Embedded
Development Board.
References
See the Spartan-6 FPGA Data Sheet.

Configuration

The SP605 supports configuration in the following modes:
•
•
•
•
•
For details on configuring the FPGA, see
Mode switch SW1 (see
System ACE CF default configuration.
References
See the Spartan-6 FPGA Configuration User Guide for more information.
12
Number Feature
Switches
a. SP605 Power On-Off Slide
Switch
b. FPGA Mode DIP Switch
17
c. System ACE CF
Configuration DIP Switch
d. FPGA PROG, CPU Reset,
and System ACE CF Reset
Pushbutton Switches
18 FMC LPC Connector
a. Power Management
Controller
19
b. Mini-Fit Type 6-Pin, ATX
Type 4-pin
JTAG (using the included USB-A to Mini-B cable)
JTAG (using System ACE CF and CompactFlash card)
Master SPI x4
Master SPI x4 with off-board device
Linear BPI Flash
Table 1-30, page
www.xilinx.com
Notes
Power, Configuration,
Pushbutton Switches
Samtec ASP-134603-01
2x TI UCD9240PFC
12V input power connectors
[Ref 1]
"Configuration Options."
55) is set to 10 = Slave SelectMAP to choose the
UG526 (v1.1.1) February 1, 2010
Schematic
Page
14, 18, 20,
25
25
18
20
14, 20
10
21, 26
25
[Ref 2]
SP605 Hardware User Guide