Release M.08.80 Through M.08.83 Enhancements - HP ProCurve Series 3400cl Release Notes

The following shows a sample output from this new command.
ProCurve# show interface port-utilization
Port Mode
---- ----
1 100FDx
2 1000FDx
3 100FDx
4 1000FDx
5 1000FDx
6 1000FDx
7 1000FDx
8 1000FDx
9 100FDx
Figure 2. Example rate display output for ports
Operating Notes
■ For each port on the switch, the command provides a real-time display of the rate at which
data is received (Rx) and transmitted (Tx) in terms of kilobits per second (KBits/s), number
of packets per second (Pkts/s), and utilization (Util) expressed as a percentage of the total
bandwidth available.
As in previous software versions, the show interfaces <port-list> command can be used to
■
display the current link status and the port rate average over a 5 minute period. Port rates
are shown in bits per second (bps) for ports up to 1 Gigabit, and are shown in kilobits per
second (Kbps) for 10 Gigabit ports.

Release M.08.80 through M.08.83 Enhancements

Software fixes only; no new enhancements.
| Rx
| ------- -------
| KBits/s Pkts/s
+ ------- -------
| 100000
| 0
| 536
| 0
| 0
| 0
| 0
| 0
| 0
Release M.08.80 through M.08.83 Enhancements
------ -------
Util KBits/s
------ -------
525 12 100000
0 0
44 00.53
0 0
0 0
0 0
5 0
5 0
30 0
Enhancements
Tx
------ ------
Pkts/s Util
------ ------
400
0 0
504 0 00.50
0 0
0 0
0 0
0 0
0 0
0 0
10
0
0
0
0
0
0
0
27