Release M.10.67 Enhancements; Release M.10.68 Enhancements; Lacp And Link Traps Global Disable - HP ProCurve Series 3400cl Release Notes

Release M.10.67 Enhancements

Software fixes only, no new enhancements.

Release M.10.68 Enhancements

Release M.10.68 includes the following enhancement:
■ Enhancement (PR_0000003127) — A Link Trap and LACP Global enable/disable feature
has been added.

LACP and Link Traps Global Disable

Two SNMP commands are added to allow disabling of LACP and link traps on multiple ports at one
time. The new commands operate in the same manner as the CLI commands no int all lacp and no
snmp-server enable traps link-change all.
The new SNMP OIDs are:
hpSwitchLACPConfig OBJECT IDENTIFIER ::= { hpSwitchConfig 28 }
hpSwitchLACPAllPortsStatus OBJECT-TYPE
SYNTAX INTEGER {
ACCESS read-write
STATUS mandatory
DESCRIPTION "Used to set administrative status of LACP on all the
::= { hpSwitchLACPConfig 1 }
disabled (1),
active (2),
passive (3)
}
ports. A Port can have one of the three
administrative status of LACP.
Active/Passive/Disabled are the three states."
Enhancements
Release M.10.67 Enhancements
143