Release M.10.04; Release M.10.05; Release M.10.06 - HP ProCurve Series 3400cl Release Notes

sFlow (PR_1000321195)— A network management application may incorrectly report
■
spikes in traffic when sFlow is first re-enabled.

Release M.10.04

Problems Resolved in Release M.10.04 (Never released)
Enhancement (PR_1000330743) — Denial of Service logging enhancement with imple-
■
mentation of Instrumentation Monitor. See
■ Enhancement (PR_1000331027) — TCP/UDP port closure feature added. See
Port Closure" on page 75
■ STP/RSTP/MSTP (PR_1000330532) — Improved the "show" commands display of STP
port detail information to assist in monitoring and troubleshooting of the spanning tree
protocol. See "Spanning Tree Show Commands" on page 77

Release M.10.05

Problems Resolved in Release M.10.05 (Not a general release)
■ Enhancement (PR_1000311510) — Ping conformance as defined in RFC 2925.
■ SSHv2 (PR_1000320822) — The Switch does not generate SSHv2 keys and may crash with
a message similar to:
TLB Miss:
ID=0x821ae330 fp:0x00000000 sp:0x821adfb8 ra:0x800803f0 sr:0x1000fc01.

Release M.10.06

Problems Resolved in Release M.10.06
■ CLI (PR_1000334412) — Operator can save manager config changes.
■ Crash/STP (PR_1000335117) — Improvement of the PR_1000300623 fix, first included in
M.08.95.
Enhancement (PR_1000330704) — RADIUS Command Authorization and Accounting for
■
the Command Line Interface.
Log (PR_1000323790) — Non-ProCurve mini-GBICs identified, but logged only as "self
■
test failure" instead of "unsupported".
■ OSPF (PR_1000323201) — OSPF with MD5 does not always redistribute connected
networks.
Virtual Addr=0x00000000 IP=0x80593a30 Task='swInitTask' Task
Software Fixes in Release M.08.51 - M.10.72
"Instrumentation Monitor" on page 70
for details.
Release M.10.04
for details.
"TCP/UDP
159