Release M.08.97; Release M.10.01; Release M.10.02; Release M.10.03 - HP ProCurve Series 3400cl Release Notes

Software Fixes in Release M.08.51 - M.10.72

Release M.08.97

Release M.08.97
Problems Resolved in Release M.08.97 (Never released)
OSPF (PR_1000319678) — Switch does not accept IP fragmented OSPF packets.
■

Release M.10.01

Note: The M.10.xx software releases run only on the ProCurve 3400cl series.
Problems Resolved in Release M.10.01 (Not a general release)
■ Boot ROM/X-Modem (PR_1000327175) - Boot ROM I.08.11 allows larger file images to
be loaded into flash and corrects Console port (X-Modem) reliability issues.
Note: The first time the 3400cl switch boots up with software version M.10.01 or later, Boot ROM
version I.08.11 is automatically installed.
Crash/ACL (PR_1000323675) — The Switch may crash with a message similar to:
■
ASSERT: Software exception at aaa8021x_proto.c:501 -- in 'm8021xCtrl'
ICMP (PR_1000235905) — Switch does not send a 'destination unreachable' response
■
message when trying to access an invalid UDP port.
SNMPv3 (PR_1000325021) — Under some conditions, SNMPv3 lines are not written to
■
the running-configuration file.

Release M.10.02

Problems Resolved in Release M.10.02 (Not a general release)
Enhancement (PR_1000328392) — Added RADIUS assigned ACLs.
■
■ Enhancement (PR_1000328716) — Added new "show sFlow" commands.

Release M.10.03

Problems Resolved in Release M.10.03 (Never released)
■ Crash/sFlow(PR_1000322009) — The Switch may crash with a message similar to:
Software exception in ISR at queues.c:123.
Crash/sFlow (PR_1000327132) — The Switch may crash with a message similar to:
■
Software exception in ISR at btmDmaApi.c:304.
158