HP ProCurve Series 3400cl Release Notes page 70

Enhancements
Release M.10.02 Enhancements
Client's Username (802.1X or Web Authentication)
mobile011 Auth-Type:= Local, User-Password == run101112
HP-IP-FILTER-RAW = "permit in tcp from any to 10.10.10.101",
HP-IP-FILTER-RAW += "deny in tcp from any to any",
HP-IP-FILTER-RAW += "permit in ip from any to any"
Client's Username (MAC Authentication)
08E99C4F0019 Auth-Type:= Local, User-Password == 08E99C4F0019
HP-IP-FILTER-RAW = "permit in tcp from any to 10.10.10.101",
HP-IP-FILTER-RAW += "deny in tcp from any to any",
HP-IP-FILTER-RAW += "permit in ip from any to any"
Figure 8. Example of Configuring the FreeRADIUS Server To Support ACLs for the Indicated Clients
Format Details for ACEs Configured in a RADIUS-Based ACL.
Any instance of a RADIUS-Based ACL is structured to filter authenticated client traffic as follows:
Applies only to inbound client traffic on the switch port the authenticated client is using.
■
Allows only the "any" source address (for any authenticated IP device connected to the port).
■
■ Applies to all IP traffic from the authenticated client or to a specific type of IP traffic type
from the client. Options include TCP, UDP, or any other type of IP traffic that is identified by
an IP protocol number. (More information on protocol numbers is provided in the following
ACL syntax description.)
■ Has one of the following destination types:
• A specific IP address
• A contiguous series of IP address or an entire subnet
• Any IP address
■ Where the traffic type is either TCP or UDP, the ACE can optionally include one or more TCP
or UDP port numbers.
60
Note that when the client MAC address is used for authentication, this address is used
in both the username and password spaces in the entry.
Client's Password (802.1X or Web Authentication)
Client's Password (MAC Authentication)
Client's Password (MAC Authentication)