Release M.10.21; Release M.10.22 - HP ProCurve Series 3400cl Release Notes

Enhancement (PR_1000358900) — A RADIUS accounting enhancement was made. More
■
information about this enhancement will be made available in a future update.

Release M.10.21

Problems Resolved in Release M.10.21 (Not a general release)
Crash (PR_1000368540) — The switch may crash with a message similar to:
■
Software exception at parser.c:8012 -- in 'mSess2',
task ID = 0x90e10e0 -> ASSERT: failed.
■ Crash (PR_1000372183) — When a meshed network of switches is connected to a non-
meshed switch, the meshed switch may crash with a message similar to:
Software exception at ldbal_util.c:5970 -- in 'eDrvPoll',
task ID = 0x5f765a0 -> ASSERT:
■ Crash (PR_1000376546) — Rebooting with IGMP enabled may cause the switch to crash
with a message similar to:
Software exception at sw_sem.c:112 -- in 'swInitTask', task ID =
0x836b2c40 -> semTake() NULL semaphore: ip_igmp_init.c:1304.
Web-UI (PR_1000373711) — Attempting to access the WebUI of a stack member without
■
being logged on as Manager returns a "404 Page Not Found" error.
XRRP (PR_1000368594) — When XRRP infinite failback is enabled, the switch fails to
■
forward packets after a reboot of the Master.

Release M.10.22

Problems Resolved in Release M.10.22 (Not a general release)
Crash (PR_1000375501) — When a link is disconnected and reconnected on a tagged
■
802.1X supplicant port, the switch may crash with a message similar to:
Software exception at macaddr.c:215 -- in 'm8021xCtrl',
task ID = 0x8ad9960 -> ASSERT:
■ Enhancement (PR_1000376406) — Loop Protection feature additions, including packet
authentication, loop detected trap, and receiver port configuration.
Software Fixes in Release M.08.51 - M.10.72
failed
failed
Release M.10.21
165