Release M.10.45; Release M.10.46; Release M.10.47 - HP ProCurve Series 3400cl Release Notes

Release M.10.45

Problems Resolved in Release M.10.45 (Not a Public Release)
Web-UI (PR_1000416955) — Inserting an LH GBIC into dual personality ports results in
■
the LH ports not appearing in the device view.
Meshing (PR_1000453201) — Concurrent use of meshing and spanning tree may result in
■
instability in spanning tree, with chronic root bridge transitions every 20 to 40 seconds.
■ Config (PR_1000400244) — The switch prompts the user to save config, even though no
apparent changes have been made. However, if SNMP sets have occurred in the background,
then the user will still see the save config prompt due to the configuration changes caused
by the SNMP sets.

Release M.10.46

Problems Resolved in Release M.10.46 (Not a Public Release)
SSH (PR_1000453226) — Configuration of SSH login to the manager mode (using the
■
command, aaa authentication ssh enable public-key <enter>) triggers an error "Not legal
combination of authentication methods," but it should be a valid command syntax.
■ DIPLD (1000457808) — When a user with a DHCP assigned IP address de-authenticates
and then re-authenticates, the DIPLD bindings show the port is bound to multiple IP
addresses, and the switch will accept traffic from both IP addresses.

Release M.10.47

Problems Resolved in Release M.10.47 (Never Released)
■ SNMP (PR_1000448463) — The SNMP Engine ID Discovery process described in RFC
3414 is not working properly.
■ SSH/SCP (PR_1000453751) — The switch does not properly exit a secure copy protocol
(SCP) session, particularly when a software image is transferred.
■ Trunking (1000461440) — When dynamic ARP protection and DHCP snooping are
configured, a trunk's trust status cannot be configured from the appropriate interface
configuration context.
SSH/SCP (PR_1000742969) — The following issues with using SSH/SCP were fixed.
■
In show ip ssh, sessions 3 and 4 may display "console" instead of "inactive," when those
•
sessions are not in use.
Software Fixes in Release M.08.51 - M.10.72
Release M.10.45
175