Release M.10.28; Release M.10.29 - HP ProCurve Series 3400cl Release Notes

Software Fixes in Release M.08.51 - M.10.72

Release M.10.28

Release M.10.28
Problems Resolved in Release M.10.28 (Not a general release)
CLI/LLDP (PR_1000377191) — Output from the CLI command, "show lldp info remote-
■
device <port>" shows a blank field for the chassis ID.
CLI (PR_1000390970) — The command "tftp-enable" is removed from the CLI since that
■
functionality is served by "tftp server|client".
■ CLI/Counters (PR_1000379222) — Jumbo sized frames received on 10GbE ports decre-
ment the "Total Rx Errors" counters. The 32 bit counter rolls from 0 backwards to 4,294,967,295
and continues to decrement with each received Jumbo frame.
Trunking (PR_1000238829) — Trunks numbered trk10 and greater cause the output from
■
the CLI command "show span" output to be misaligned.

Release M.10.29

Problems Resolved in Release M.10.29 (Never released)
■ CLI/Config (PR_1000375830) — When using the "no VLAN" command, the user is asked
if they want to remove the VLAN. Answering "no" will result in the VLAN being removed
anyway.
■ CLI/config (PR_1000391119) — Copying a configuration file to a switch with a BPDU
protection timeout value set may produce an error similar to:
CCCCCline: 10007. 1200: Error setting configuration
CLI (PR_1000390385) — The CLI help text for "span bpdu-protection-timeout" is incorrect;
■
it erroneously displays the help text for "span hello-time."
Enhancement (PR_1000376626) — Enhance CLI "qos dscp-map he" help and "show dscp-
■
map" text to warn the user that inbound classification based on DSCP codepoints only occurs
if "qos type-of-service diff-services" is also configured.
■ Lockup (PR_1000394749) — Switch may lockup when a certain J4858A transceiver type
is inserted.
SNMP (PR_1000392847) — RMON alarms that monitor port-specific OIDs are lost if the
■
switch is rebooted.
Traceroute (PR_1000379199) — The reported "traceroute" time is inaccurate; it is one
■
decimal place off.
168