Release M.10.68; Release M.10.69 - HP ProCurve Series 3400cl Release Notes

Software Fixes in Release M.08.51 - M.10.72

Release M.10.68

Crash (PR_0000004023) — Repeated PCM configuration scans using SSH/SCP may cause
■
the switch to crash with a message similar to the following.
PPC Data Storage (Bus Error) exception vector 0x300:
Stack Frame=0x07af44c0 HW Addr=0x6520463a IP=0x00965a88
Task='tSsh0' Task ID=0x7af4810
Release M.10.68
Problems Resolved in Release M.10.68
■ TACACS+ (PR_0000003839) — The TACACS server configuration parameter accepts an
address from an invalid/reserved IP range: 0.0.0.1 to 0.255.255.255.
■ MAC Table (PR_0000005185) — Hardware MAC table entries are not getting deleted
appropriately.
Enhancement (PR_0000003127) — Link Trap and LACP Global enable/disable feature.
■
For more information, see

Release M.10.69

Problems Resolved in Release M.10.69 (Not a Public Release)
Management (PR_0000005902) — The switch management may become unresponsive,
■
resulting in loss of TELNET, Web Management, and console access functionality of the
switch.
PCM (PR_0000008113) — Repeated ProCurve Manager Config Scans may trigger subse-
■
quent Config Scan failure.
SFTP/SCP (PR_0000008270) — Beginning with software version M.10.67, SFTP/SCP will
■
not close the "client" session after the file transfer. The client session will need to be manually
closed.
■ PC phone/authentication (PR_0000008777) — When using an IP phone in tandem with
a PC connected to the phone, the phone will sometimes come up using untagged packets
until acquiring its tagged VLAN and priority information. In this case the IP phones untagged
MAC address will block the PC communicating to the port until the phone's MAC address
expires (default 5 minutes).
■ 802.1X (PR_0000008780) — 802.1X does not receive expiration notifications from port
security if 802.1X is running alone, without Web or MAC-based Authentication.
180
"Release M.10.68 Enhancements" on page 143.