Hardware Installation; Familiarizing Yourself With The 3Mp2Fh, 2Mp2Fh Or 1Mp2Fh; Switch Locations - Barco CORONIS 1MP System Manual

HARDWARE INSTALLATION

Notice: Wear a protective ESD strap during installation or handling of
the display controller. Electrostatic charges can damage the display
controller.

Familiarizing Yourself With the 3MP2FH, 2MP2FH or 1MP2FH

Prior to installing your 3MP2FH, 2MP2FH or 1MP2FH display
controller(s) in your PC please take a few minutes to familiarize
yourself with both the display controller and the PCI slots in your
computer.

Switch Locations

There are four switches located at S1 on the 3MP2FH, 2MP2FH or
1MP2FH. The following table shows their locations and briefly
describes their functions and default states.
System manual Coronis 1MP
Figure 1: The 3MP2FH, 2MP2FH or 1MP2FH
Display controller installation
17