Barco CORONIS 1MP System Manual page 89

To access the BarcoMed Hardware Tab do the following:
1. Open the "Display Properties Control Panel" by right clicking on
the desktop, then select "Properties".
2. Under Windows NT 4.0, Click on the "BarcoMed Hardware Tab"
(see figure 22 below).
Under Windows 2000 and Windows XP, click on the "Settings"
tab. Double click on the rectangle that represents the BarcoMed
Display Controller to bring up its property page. Click on the
"BarcoMed Hardware Tab" (see figure 23 on the next page).
Figure 22: BarcoMed Hardware Tab under Windows NT 4.0
System manual Coronis 1MP
BarcoMed software driver installation
90