Barco CORONIS 1MP System Manual page 74

BarcoMed software driver installation
Special Note: If you installed the drivers with DualView disabled,
Windows will still show two devices installed for each BarcoMed
Display Controller installed under "Display Adapters" in the
"Device Manager Control Panel". The second device will be
disabled. This is normal. Do NOT try to enable any of the disabled
display adapters.
9. The "Device Confirmation" screen displays the device driver that
will be installed. If you want to change your selection, click "Back"
to return to the Device Selection Screen. Click "Next" to begin
installing the driver. Click "Cancel" to abort the driver installation.
Caution: Once you click "Next", you cannot cancel the driver
installation.
Prior to beginning the installation the BarcoMed Driver Install
Wizard will warn you that while the driver is being installed your
display may flicker. Click "OK" to continue.
10. When the screen shown in figure 16 or figure 17 appears, click
"Yes" or "Continue Anyway" to continue. This screen may
appear multiple times.
Figure 16: Windows 2000 Digital Signature Not Found Warning
System manual Coronis 1MP 75