Barco CORONIS 1MP System Manual page 75

Figure 17: Windows XP Windows Logo Testing Warning
11. When the screen shown in figure 18 below appears select the
palette mode you wish to use and if you want to enable
DirectDraw and click "Next".
12. When the Driver Install Wizard tells you that it has successfully
installed the selected driver, click "Finish". The wizard will now
begin installing the next selected piece of BarcoMed Software. If
you are working with the default selections, this will be the "Barco
DPMS Screen Saver".
System manual Coronis 1MP
BarcoMed software driver installation
Figure 18
76