Barco Coronis 5MP Installation & User Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Medical Equipment
  5. Coronis 5MP Mammo
  6. Installation & user manual

Barco Coronis 5MP Installation & User Manual

Hide thumbs Also See for Coronis 5MP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: System Manual, Installer and User Manual
Coronis 5MP
Installation & User Manual

Advertisement

Table of Contents
loading

Related Manuals for Barco Coronis 5MP

Summary of Contents for Barco Coronis 5MP

  • Page 1 Coronis 5MP Installation & User Manual...
  • Page 2 (This page intentionally left blank.) Coronis 5MP...

  • Page 3: Table Of Contents

    Preface ....................8 Safety Instructions................12 Recommendations for using your display system......15 Display Controller Installation ..........17 Which display controller? ..............19 Installing a Barco display controller ..........19 Overview..................19 Installation Procedure ............... 22 Display Installation ..............29 Overview.................... 31 Introduction ................
  • Page 4 Command line (Silent) Install of Drivers and Software.... 55 Display Controller Tools ............57 Languages supported................ 59 Barco Driver Properties ..............59 Accessing the Barco tab ............. 59 Using the Barco tab..............60 Advanced properties for MXRT controller......... 62 Barco Adapter Configuration............62 OpenGL and Direct3D ..............
  • Page 5 Settings ..................77 Getting information..............78 Advanced functions ................80 About this chapter..............80 Advanced functions in the Luminance menu ......81 Advanced functions in the Settings menu........ 82 Advanced functions in the Information menu......82 Advanced functions in the Adjustments menu ......85 Maintenance ..................
  • Page 6 (This page intentionally left blank.)

  • Page 7: Copyright Notice

    - graphical, electronic, or mechanical including photocopying, taping or information storage and retrieval systems - without written permission of Barco © 2009 Barco N.V. All rights reserved.

  • Page 8: Preface

    Barco N.V. or Barco Inc., for use only under the specific terms of a software license agreement between Barco N.V. or Barco Inc. and the licensee. No other use, duplication, or disclosure of a Barco software product, in any form, is authorized.
  • Page 9 Preface Disposal Information This product consists of devices that may contain mercury, which must be recycled or disposed of in accordance with local, state, or country laws. (Within this system, the backlight lamps in the monitor display contain mercury.) This equipment has required the extraction and use of natural resources for its production.
  • Page 10 Preface Information for China ROHS compliance Table of toxic and hazardous substances/elements and their content, as required by China’s management methods for controlling pollution by electronic information products Toxic or hazardous Substances and Elements Part Name Cr6+ PBDE Metal parts Plastic parts PCB or PCBA LCD panel...
  • Page 11 Preface LCD Monitor 　 　 　 　 　 　 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 　 （Pb） （Hg） （Cd） （Cr6+） （PBB） （PBDE） 金属机构件 塑料机构件 电路板组件 * 液晶面板 电源模块 / 适配器 电源线 外部信号连接线 *： 电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、集成电路 、连接器等 ○：表示该有毒有害物质在该部件所有均质材料中的含量均在 《电子信息产品中有 毒有害物质的限量要求标准》规定的限量要求以下 ×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 《电子信息产品 中有毒有害物质的限量要求标准》规定的限量要求；...

  • Page 12: Safety Instructions

    Safety Instructions Safety Instructions General Recommendations Read the safety and operating instructions before operating the display. Retain safety and operating instructions for future reference. Adhere to all warnings on the display and in the operating instructions manual. Follow all instructions for operation and use. Electrical shock Type of protection (electrical): Class I equipment...
  • Page 13 Safety Instructions • Power cords: Power cord with CEE 7 plug: The colors of the mains lead are colored in accordance with the following code: Green-and- yellow: Earth (safety earth), Blue: Neutral, Brown: Line Power cord with ANSI 73.11 plug: The wires of the power cord are colored in accordance with the following code: Green/yellow: ground, White: neutral, Black: line (live) •...
  • Page 14 Safety Instructions This apparatus conforms to: CE, IEC 60950, UL 60950, CAN/CSA C22.2 No. 60950 (c-UL), CCC. National Scandinavian Deviations for Cl. 1.7.2 : Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan" Norway: "Apparatet må tilkoples jordet stikkontakt" Sweden: "Apparaten skall anslutas till jordat uttag"...

  • Page 15: Recommendations For Using Your Display System

    LCD, a limited number of these pixels may remain either dark or permanently lit, without affecting the diagnostic performance of the product. To ensure optimal product quality, Barco applies strict selection criteria for its LCD panels.
  • Page 16 Recommendations for using your display system 4. Enhance user comfort Every Barco multi-head display system is color matched with the highest specification in the market. Barco recommends keeping color-matched displays together. Furthermore, it is important to use all displays of a multi-head configuration at the same rate to preserve color matching throughout the economic lifetime of the system.

  • Page 17: Display Controller Installation

    Display Controller Installation...
  • Page 18 Display Controller Installation (This page intentionally left blank.)

  • Page 19: Which Display Controller

    Which display controller? Which display controller? Your Barco medical display is compatible with a large range of Barco and non-Barco display controller boards. Depending on the customer’s order details, the display can be delivered with or without display controller. The brochure “Barco medical display overview” on the website www.barco.com/medical (Downloads section) contains a...
  • Page 20 Installing a Barco display controller models is delivered with your system, and follow the corresponding installation instructions: Board Model VGA Jumper Compatible PCIe/PCI Slot Barco MXRT 1150 x1*, x8, x16 Barco MXRT 2100 Barco MXRT 2150 Barco MXRT 5100 Barco MXRT 5200...
  • Page 21 VGA on ALL the other BarcoMed display controllers. To use a BarcoMed display controller with a third party VGA controller or with one or more Barco MXRT display controllers, do NOT enable VGA on the BarcoMed display controller.

  • Page 22: Installation Procedure

    Installation Procedure Installation Procedure The following instructions will take you step by step through the installation of the display controller(s) for your B ARCO ORONIS Display System Caution: Wear a grounded, protective ESD strap when handling or during installation of the display controller. Electrostatic charges can damage the display controller.
  • Page 23 Installation Procedure 7. Align the display controller(s) for your B ARCO ORONIS Display System with the slot(s) and press it(them) in firmly until the card(s) is(are) fully seated. Note: The next step applies only to the MXRT 5100, MXRT 7100, and MXRT 7200.
  • Page 24 “Display installation” section of this manual. Figure 6 IO-Panel for the Barco MXRT 1150 and Barco MXRT 2150 S-Video Connection This option is not supported by Barco. DMS-59 connector provides DVI-I / Head 1 & Head 2...
  • Page 25 Installation Procedure Figure 7 IO-Panel for the Barco MXRT 2100 and Barco MXRT 5200 MXRT 2100 MXRT 5200 Head 2– DVI-I Head 1– DVI-I Connection Connection Head 1– DVI-I Head 2– DVI-I Connection Connection Note: For 6mp, connect Head 1 to left input, and Head 2 to right...
  • Page 26 Installation Procedure Figure 8 IO-Panel for the Barco MXRT 5100, Barco MXRT 7100 and Barco MXRT 7200 Head 1 – DVI-I Connection Stereo Connection This option is not supported by Barco. Head 2 – DVI-I Connection Note: For 6mp, connect Head 1 to left input, and Head 2 to right input.
  • Page 27 Note: Your Barco display(s) will be running in a basic video mode at a default refresh rate. Higher resolutions and refresh rates, such as 1536x2048@60Hz, are not available at this stage of the installation.
  • Page 28 Installation Procedure instructions in the Driver and Software Installation section of this manual.

  • Page 29: Display Installation

    Display Installation...
  • Page 30 Display Installation (This page intentionally left blank.)

  • Page 31: Overview

    Overview Overview Introduction The MFGD 5421, BARCO’s 21” 5 megapixel grayscale LCD display, guarantees perfect image quality in medical imaging applications. The display combines a TFT (thin film transistor) liquid crystal display panel structure and a built-in backlight with inverter for a better picture quality.

  • Page 32: Package Contents

    Overview Package contents The package should include the following items, please check. If some of the items are missing, please contact the reseller from whom you have purchased the unit. • The MFGD 5421 display • Power supply • DVI cable •...

  • Page 33: Controls And Connectors

    Overview Controls and connectors Figure 11 Front (1) Power LED • The LED is off when the display is off. • The LED is green when the display is on (when enabled in the on-screen menus). • The LED is orange when the display is in Stand-by power- saving mode.
  • Page 34 Overview Figure 12 Side (2) USB downstream connector (3) Control wheel for navigating through the on-screen display (OSD) menus and changing values in the menus Figure 13 Rear (4) USB downstream connector (5) USB upstream connector (6) Digital DVI (video and data) input (7) DC 12V power input...

  • Page 35: Installation

    Installation Installation Precautions • Keep your original packaging. It is designed for this display and is the ideal protection during transport. • Avoid reflections in the flat panel to reduce eye strain. • Place the display on a strong and stable table or desk. •...

  • Page 36: Portrait Or Landscape Position

    Installation To remove the clip: 1. Position the display with its rear side facing you. 2. Lift up the 2 clips of the foot cover to release the cover from the foot. 3. Pull the lower side of the cover towards you and simultaneously slide the cover downward.

  • Page 37: Connecting The Cables

    Installation Figure 15 Should you change the panel orientation without tilting it first, you might irreversibly damage the tilt & swivel mechanism. 3. To change from portrait to landscape, turn the panel counterclockwise while tilting it slightly. 4. To change from landscape to portrait, turn clockwise. Connecting the cables To get access to the connectors, open the cover of the connector compartment by pulling down the 2 clips of the cover.

  • Page 38: Routing The Signal Cables

    Installation To connect the power: Connect to DC input Connect one end of of the display power cable Figure 16 1. Connect the output of the 12V DC power supply to the DC input (7) of the display. 2. Connect one end of the proper power cable to the AC input of the 12V DC power supply.

  • Page 39: Using The Usb Hub

    Installation Connector compartment Push the upper side of Signal cables routed under foot the cover onto the foot cover Figure 17 1. Push the upper side of the cover onto the foot, so that the hooks on the cover are positioned right under the holes in the foot.

  • Page 40: Tilt And Swivel Positioning

    Installation Tilt and swivel positioning Adjust the position of the panel for best viewing conditions. The display foot allows adjusting the horizontal viewing angle, vertical viewing angle and panel height. Figure 18 Starting up Proceed as follows: 1. Switch on the signal source (E.g., PC). 2.

  • Page 41: How To Avoid Image Retention

    How to avoid image retention How to avoid image retention Image retention (image sticking, ghost image) is the phenomenon where an image, or a part of it, seems to be ‘burnt’ in the LCD panel. When you display e.g. a uniform light gray image you distinguish the ghost image in the background.
  • Page 42 How to avoid image retention To activate appropriate screen saving, proceed as follows: In the display OSD menus, open the Settings menu and switch DPMS on. For more information, please consult the display operation chapter. In Windows, open the Display control panel. Open the Screen Saver tab.

  • Page 43: Software Installation

    Software Installation...
  • Page 44 Software Installation (This page intentionally left blank.)

  • Page 45: Driver And Software Installation Prerequisites

    5MP Display System. ARCO ORONIS Before you begin make sure that all of your Coronis 5MP(s) are connected to the appropriate display controller(s) in your system. Note: This installation procedure is based on operating Windows in “Classic” view style. If “Home” or “Default” view style is selected in Windows, sections of this procedure may be different than what is listed.

  • Page 46: Installing The B

    • Windows Server 2008, • Windows 2008 x64, and • Windows Vista 32 & 64 Bit Edition. You will need to install the Coronis 5MP system drivers and software in the following cases: • After you have installed the display controller(s) for your...
  • Page 47 6. The Barco Product Installation Wizard will now guide you through the installation of the driver. 7. Click Yes to accept the terms of the Barco and ATI license agreements. The Barco setup wizard will continue with the installation only if you accept the terms of both license...

  • Page 48: Automated Display Configuration

    If the Barco Monitor Plug and Play Software fails to detect your Barco displays or fails to attach them to the desktop correctly please refer to the section, Setting the resolution of your Barco Display in the Configuring Windows section of this manual.

  • Page 49: Uninstalling The Drivers And Software

    If you leave the card in the system, Vista will automatically reinstall the driver. If you are uninstalling the Barco MXRT drivers prior to doing a driver upgrade, complete the Barco MXRT Driver Removal Wizard as described, and reboot the system into Safe Mode.

  • Page 50: Command Line (Silent) Install Of Drivers And Software

    1. Insert the B 5MP Display System Installation ARCO ORONIS CD-ROM into your CD/DVD drive. When the Barco Product Installation Wizard starts click “Cancel”. 2. Click the Start button in the task bar. 3. Click Run. 4. Click Browse and...
  • Page 51 Run MXRT driver cleaner.bat by double clicking on it (this will either be installed as an icon on your desktop, or can be found on the Barco Display System installation CD at: drivers\2KXP\ATI). This will remove all the previous installed MXRT driver files.

  • Page 52: Installing The B Arco Med Coronis Or Nio Drivers And Software

    • Windows Server 2003 x64 Edition, and • Windows Vista 32 & 64 Bit Edition. You will need to install the Coronis 5MP system drivers and software in the following cases: • After you have installed the display controller(s) for your...
  • Page 53 Next to accept the default settings or if you know the settings required for your viewing application, you may select them now and then click Next. You may change these settings later by accessing the Barco Driver tab within the Windows Display Control Panel. Figure 3 Please refer to your application manuals for information on the correct Palette and Drawing modes to select.

  • Page 54: Automated Display Configuration

    If the Barco Monitor Plug and Play Software fails to detect your Barco displays or fails to attach them to the desktop correctly please refer to the section, Setting the resolution of your Barco Coronis Display in the Configuring Windows section of this manual.

  • Page 55: Command Line (Silent) Install Of Drivers And Software

    To install the drivers and software silently, please follow the steps below: 1. Insert the B 5MP Display System Installation ARCO ORONIS CD-ROM into your CD/DVD drive. When the Barco Product Installation Wizard starts click “Cancel”. 2. Click the Start button in the task bar.
  • Page 56 Installing the B or Nio drivers and software ARCO ORONIS 3. Click Run. 4. Click Browse and a) Browse to the root directory of the B ARCO ORONIS Display System Installation CD-ROM. b) Click on the file, Setup.exe, and click Open. a) Browse to the root directory of the location where you saved the contents of your B 5MP Display...

  • Page 57: Display Controller Tools

    Display Controller Tools...
  • Page 58 Display Controller Tools (This page intentionally left blank.)

  • Page 59: Languages Supported

    Accessing the Barco tab You must have logged on to Windows using an account Note: with administrator privileges in order to use the Barco portions of the Windows Display Control Panel to change any display settings. 1. Open the Windows Display Control Panel by one of the...

  • Page 60: Using The Barco Tab

    Settings”. 2. Click on the Settings tab (The Settings tab is not present in Vista). 3. Select the rectangle that represents the Coronis 5MP whose settings you wish to change. 4. Click on the Advanced Settings button. 5. Select the Barco tab from the Properties screen.
  • Page 61 The Barco System Report, also known as BarcoMed SelfExam, is a wizard based tool which collects data about the components that are installed in your system. This information is used by the Barco MIS Support team when trying to resolve customer issues.

  • Page 62: Advanced Properties For Mxrt Controller

    Barco Adapter Configuration The Barco Adapter Configuration page allows you to switch between the following monitor configurations and display options for the displays connected to a Barco MXRT controller: Display Layout • DualView Both displays are enabled independent of each other.

  • Page 63: Opengl And Direct3D

    If it is unchecked, then it will be the largest mode in the Cloned displays mode list. Clone mode can only be exited through the Barco Adapter Configuration page in the Barco Advanced Control Panel. Not all options are available at all times. Please select the Note: help tips in the driver software for more information.
  • Page 64 There is also a checkbox provided for enabling Custom Settings. Custom Settings Barco recommends that you use the default settings, Note: unless your viewing application vendor provides detailed information on custom settings.

  • Page 65: Rotation

    Rotation The Rotation page is visible only when the display connected to the current (active) head of your Barco MXRT display controller does not support rotation internally. The Rotation feature allows the user to rotate the Windows desktop to match the physical orientation of the display.
  • Page 66 BarcoMed control panel settings Single Source Master Activating a configuration profile The Configuration Profiles list box displays a number of common applications whose optimal configuration profile are factory-set by default. To activate a particular profile, select the application name from the list and click Apply.

  • Page 67: Advanced Properties For Barcomed Coronis Or Barcomed Nio

    Advanced Properties for BarcoMed Coronis or BarcoMed Palette modes Barco Drawing Modes From the tab you can select one of four palette modes. • Color to Gray compatibility • User Modifiable Color Palette • Static Gray Palette including standard system colors •...
  • Page 68 BarcoMed control panel settings Single Source Master applications, which can cause image color values to appear distorted in the background application. As shown in figure 3, the 20 standard system colors are converted from RGB to gray values. The rest of the 236 entries from index 10 to 245 contain the missing gray values so that the palette has the full 256 gray values within it.

  • Page 69: Drawing Modes

    standard system colors. In this palette mode, these entries are made up from entries in the bottom or the top of the gray ramp. If you are unsure whether or not your application requires Note: this “Static Gray Palette with NO System colors” mode, contact your application provider.

  • Page 70: Monitor Configuration

    Description of 10-bit grayscale To show 1024 simultaneous shades of gray all BarcoMed “H” series display controllers, such as the BarcoMed 5MP2FH, BarcoMed Coronis or BarcoMed Coronis 5MP for example, run in extended depth (10-bit) mode by default. Implications When turned on the “Disable Extended Depth” option causes a...

  • Page 71: Graphics Board

    The user will be prompted to select a firmware update file to use for the update process. This file will be provided by Barco Medical Imaging Systems if and when a firmware update is required. Device Details...
  • Page 72 BarcoMed control panel settings Single Source Master...

  • Page 73: Display Operation

    Display Operation...
  • Page 74 Display Operation (This page intentionally left blank.)

  • Page 75: Operation

    Operation Operation Operating precautions Continuous operation of the display with the same screen may result in some image sticking on the LCD panel. Over 10 hours operation with the same image content is not recommended. Switching on the display DPMS may decrease the risk of image sticking (image retention).
  • Page 76 Operation The Main Menu appears. This is the top level of the menu system. MFGD 5421 MAIN MENU Luminance Settings Information EXIT • To browse or scroll through the menus on the current level, turn the wheel clockwise or counterclockwise. •...

  • Page 77: Setting The Luminance Value

    Operation Saving changes When you change a value, the change is automatically saved. Setting the Luminance value With this function, the backlight value is stabilized by the I-Guard sensor. The value you enter is the target backlight luminance, expressed in Cd/m². Proceed as follows: 1.

  • Page 78: Getting Information

    Operation 3. Turn the wheel to select the desired menu item. 4. Perform the settings as described below. The Settings menu contains the following items: DPMS Click the control wheel to switch on/off the automatic power saving system (DPMS) Power LED Click to switch the power LED on/ off.
  • Page 79 Operation To enter the Information menu: 1. In the main menu, turn the control wheel to select the Information menu. MFGD 5421 MAIN MENU Luminance Settings Information EXIT 2. Click the control wheel. The Information menu appears. You can select to view General information or Current Input Format information.

  • Page 80: Advanced Functions

    Important The functions described in this chapter are intended for trained service staff only! Improper use of these functions may disorder the display. BARCO cannot be held responsible for the results or damage caused by improper use of these functions.

  • Page 81: Advanced Functions In The Luminance Menu

    Advanced functions 3. Click and hold the control wheel for a few seconds until the OSD main menu is refreshed on the screen. MFGD 5421 MAIN MENU Luminance Settings Information Adjustments EXIT You have now logged in as advanced user. Advanced functions in the Luminance menu The Luminance menu contains the following advanced function: Manual Backlight...

  • Page 82: Advanced Functions In The Settings Menu

    Advanced functions Advanced functions in the Settings menu The Settings menu contains the following advanced functions: Panel position Click to select the desired option: • Auto: Select if the display will be used in both portrait and landscape orientation. • Portrait: Select if the display is always used in portrait orientation.
  • Page 83 Advanced functions Service The Service information menu contains the following items: Display Name The display type Display Ser No Indicates the display serial number Display Stock No Indicates the display order number Panel Ser No Indicates the flat panel serial number Panel Prod Date Indicates the flat panel production date Firmware...
  • Page 84 Advanced functions Measurements The Measurements info menu contains the following items: Internal Temperature The temperature measured inside the dis- play Sensor Temperature The internal temperature measured on the I-Guard board FAN speed A value indicating the speed of the fans. Minimum speed is 0, maximum speed is 1000 Sensor Y value...

  • Page 85: Advanced Functions In The Adjustments Menu

    Advanced functions Vert.Total: The total number of lines, vertically, of the input signal Vert.Active: The number of active lines, vertically, of the input signal Vert.Blanking: The vertical blanking of the input signal Vert.Front Porch: The vertical front porch of the input signal Vert.Sync: The vertical sync length of the input signal Vert.Back Porch:...

  • Page 86: Maintenance

    It may be possible that dust particles have entered the display and are stuck to the rear of the glass. We recommend to let this cleaning procedure be done in a Barco service center. However, when really necessary, you can perform the cleaning on site if you can work in conditions that are as clean and dust- free as possible.
  • Page 87 Maintenance 3. Unscrew the 4 sunken screws at the rear, fixing the glass panel and bezel. 4. Unplug the cable plugged in on the bezel. 5. Remove the bezel with glass panel. Cleaning instructions: • Dust, fingerprints, grease etc. can be removed by using a soft damp cloth lightly moistened with plain water.

  • Page 88: Troubleshooting

    Troubleshooting Troubleshooting Windows does not show the desired display settings Should you have problems selecting display settings for portrait oriented displays in the Windows Display Properties control panel, disable the option Hide modes that this monitor cannot display in the control panel (see below). Figure 6 Information: The display contains a special memory chip that contains...

  • Page 89: Pixel Faults

    Troubleshooting Pixel Faults Permanently dark or bright pixels can happen to TFT displays. 20 or less permanently dead pixels do not make out a good case for exchanging the unit. Please contact our Customer Service Department if the number of pixel faults exceeds the above-mentioned figure.

  • Page 90: Technical Specifications

    Technical specifications Technical specifications Picture panel 21.3-inch diagonal viewable screen TFT (thin film transistor) active matrix, greyscale liquid crystal display Resolution Native: 2560 x 2048 Display area (H x V) 422.4 x 337.9 (mm) Pixel Pitch 0.165 mm (H) x 0.165 mm (V) Viewing angle (@ 10/1 contrast) Vertical: 85º...
  • Page 91 Technical specifications Controls Push / turn control wheel for stand-by switching and controls Input connectors DVI dual channel Power source Input for 12 VDC power supply unit: 90 ~ 264 VAC Input for display: 12 VDC. (The supplied 12VDC power supply must be used) Power consumption 72 watts (max.)
  • Page 92 Technical specifications Due to our policy of continuous product improvement, the above specifications are subjected to change without notice. Barco shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or conse- quential damages whatsoever resulting from furnishing, performance or use of...

  • Page 93: Medical Software

    MediCal Software Installation and Operation...
  • Page 94 MediCal Software Installation and Operation (This page intentionally left blank.)

  • Page 95: Medical Pro Installation And Operation

    MediCal Pro installation and operation MediCal Pro installation and operation MediCal Pro software installation Install MediCal Pro on the PC. Follow the instructions from the MediCal Pro User Guide. Important: Do not forget you have to have Administrator privileges to install or uninstall MediCal Pro. Using MediCal Pro You can now use MediCal Pro to configure the complete configuration and set up the Q/A tasks.
  • Page 96 MediCal Pro installation and operation 8. Run the due tasks. Please refer to the MediCal Pro User Guide for more information.

  • Page 97: Troubleshooting

    Troubleshooting...
  • Page 98 Troubleshooting (This page intentionally left blank.)

  • Page 99: Setting The Resolution Of Your Coronis 5Mp Display

    “Display Setting”. 2. Click on the Settings tab (the Settings tab is not present in Vista). 3. Select the rectangle that represents the Barco display whose settings you wish to change. If you are using the VGA capabilities of your B...
  • Page 100 5. Select the Adapter tab and then click on the List All Modes button. Select the resolution and refresh rate that your Coronis 5MP display supports from the dialog box and click In the Adapter box, the Adapter string shows if this display...

  • Page 101: Setting The Color And Palette Modes

    5MP Display System you must be logged in using an ORONIS account with administrator privileges. If you are using a color display in conjunction with your Barco grayscale display(s) you should configure your desktop before setting the resolution of the your Barco grayscale display(s).
  • Page 102 Configuring the Windows desktop (This page intentionally left blank.) (This page intentionally left blank.)
  • Page 103 Any claim under the Warranties must be notified to Barco in writing within 8 days from the date the defect or failure has been discovered or noticed the first time. The Customer, upon the occurrence of...
  • Page 104 All software installed on the system, whether they are acquired from Barco nv, MID or third party. An exception is made for software delivered by Barco nv, MID that would prove to be a cause for the mal functioning of the hardware covered under this Agreement.
  • Page 105 LCD luminance uniformity that is in within the product specifications or luminance uniformity performance that is inherent to LCD technology. Barco nv, MID does not warrant a minimum life time nor a performance of any of the consumables. Replacement of moveable parts such as power cords, remote controls, …...
  • Page 106 If there is an indication that the equipment was used – even temporary – outside its specifications, Barco nv, MID is entitled not to perform warranty repairs and terminate the warranty agreement. Any actions that have been taken by Barco nv, MID in this respect, may be invoiced to the Customer at normal pricing.
  • Page 107 NEGLIGENCE, STRICT TORT, WARRANTY OR OTHERWISE, SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT OR ANY PART THEREOF WHICH SHALL BE AT CUSTOMER'S SOLE OPTION AND COST. BARCO’S LIABILITY SHALL NOT EXCEED THE PRICE OF THE ITEM OR ITEMS OF GOODS OR SERVICES UPON WHICH SUCH LIABILITY IS BASED.
  • Page 112 B4100523-04 November 2009 www.barco.com...

Table of Contents