Display Installation; Removing The Covers - Barco Coronis Fusion 4MP User Manual

3. DISPLAY INSTALLATION

Prior to installing your Coronis Fusion 4MP / 6MP and connecting all necessary cables,
make sure to have a suitable display controller physically installed in your computer. If
you are using a Barco display controller, please consult the user guide delivered with it
to do this.
For a list of compatible display controllers, please refer to the latest version of the com-
patibility matrix available on
patibility Matrices > Barco Systems Compatibility Matrices).
3.1

Removing the covers

The connector compartment cover must be removed to get access to the connectors.
To remove the connector compartment cover
1. Gently lift the clips at one of the handles of the connector compartment cover to release that side of the
cover.
2. Do the same at the other side of the cover.
3. Remove the cover.
The display stand cover must be removed to get access to the cable routing channel.
To remove the display stand cover
1. Gently press and hold the clips at the inside top of the cover.
K5902108 CORONIS FUSION 4MP / 6MP 23/11/2016
my.barco.com (MyBarco > My Support > Healthcare > Com-
3. Display installation
7