Static Gray Palette With No System Colors - Barco CORONIS 1MP System Manual

BarcoMed software driver installation
Please note that dithering is not permitted while in this mode. The
Enable Dithering check box will be grayed-out, and dithering will be
automatically disabled regardless of whether this check box is
checked. This complies with the Windows standard interface
method. If you are unsure whether or not your application requires
this "Static Gray Palette including Standard System Colors" mode,
contact your application provider.

Static Gray Palette with NO system colors

This option sets the palette to be a static linear ramp of 256 shades
of gray. Therefore, applications are denied the ability to dynamically
change or allocate palette entries. This prevents palette conflicts
between applications, which can cause image color values to
appear distorted in the background application.
As shown in the next picture, each of the 256 entries in the palette
has an RGB value of (i, i, i) where i is the index from 0 to 255.
If you wish to use a static gray palette we recommend using the
"Static Gray Palette including Standard System Colors" option
instead of this one. This is due to the fact that some applications
assume that the first and last 10 entries of the palette are the
standard system colors. In this palette mode, these entries are
made up from entries in the bottom or the top of the gray ramp.
Please note that dithering is not permitted while in this mode. The
Enable Dithering check box will be grayed-out, and dithering will be
automatically disabled regardless of whether this check box is
checked. This complies with the Windows standard interface
method. If you are unsure whether or not your application requires
this "Static Gray Palette with NO System colors" mode, contact your
application provider.
System manual Coronis 1MP 86