Table of Contents
Advertisement
14
User's Guide
DDC
To make your installation easier, the monitor is able to Plug and Play with your
system if your system also supports DDC protocol. The DDC (Display Data
Channel) is a communication protocol through which the monitor automatically
informs the host system about its capabilities, for example, supported resolutions
and corresponding timing. The monitor supports DDC1 and DDC2B standard.
Installation
To install the monitor to your host system, please follow the steps as given below:
Steps
1. Use the supplied video cable (DVI-I, Y/C, BNC, BNCx4 to HD15) then connect to
the
host system accordingly.
2. Connect the DC power to the DC power connector on the monitor.
3. Connect one end of AC power cord into the AC Adapter and the other end to AC
power outlet.
4. Then turn the host system on and then the monitor.
5. If the monitor still does not function properly, please refer to the troubleshooting
section to diagnose the problem.
HD/SD SDI1 OUT
DC Power
HD/SD SDI1 IN
RS232C
HD15/RGBS IN
DVI-I OUT
DVI-I IN
USB
Y/C IN
HD/SD SDI2 IN
Advertisement
Table of Contents
