Specifications; Specific Safety Precaution - Axminster WS1000TA User Manual

Specific Safety Precautions
General Safety Notes
Woodworking machines can be dangerous if not used
properly. Therefore the appropriate general technical
rules as well as the following notes must be observed.
Read and understand the entire instruction manual
before attempting assembly or operation.
Keep these operating instructions close by the
machine, protected from dirt and humidity, and pass
them over to the new owner if you part with the tool.
No changes to the machine may be made.
Daily inspect the function and existence of the safety
appliances before you start the machine.
Remove all loose clothing and enclose long hair.
Before operating the machine, remove tie, rings,
watches, other jewellery, and roll up sleeves above
elbows.

Specifications

Model
Product Code
Rating
Power
Spindle Travel
Spindle Diameter
Max Spindle Projection above Table
Max Tooling Diameter Above Table
Max Tooling Diameter Below Table
Table Height
Table Size
Min Extraction Airflow Required
Dust Extraction Outlet
Overall L x W x H
Weight
08
Wear safety shoes; never wear leisure shoes or sandals.
Always wear the approved working outfit.
Do not wear gloves while operating the machine.
For the safe handling of cutting tools wear work gloves.
Control the stopping time of the machine, it may not
exceed 10 seconds.
Remove cut and jammed workpieces only when the
machine is at a complete standstill and motor is turned
off.
Install the machine so that there is sufficient space for
safe operation and workpiece handling.
Keep work area well lit.
WS1000TA
501209
Trade
2.8kW (230V, 1ph)
100mm
30mm
100mm
200mm
180mm
900mm
1,000 x 360mm
1,000m³/hr
100mm x 2
1,010 x 690 x 900mm
218kg