Axminster WS1000TA User Manual page 14

Assembly
Fig 25
Fig 27
D2
Locate the guide assembly mounting bracket (D3), using a 6mm allen key remove the four caphead bolts &
washers on top of the spindle guard (D1), place safely aside (See fig 29). Lower the guide assembly mounting
bracket (D3) on top of the spindle guard & line up the four pre-drilled holes, replace the caphead bolts & washers
you removed earlier and tighten (See fig 30) (DO NOT OVERTIGHTEN).
Fig 29
14
Circular rings
D1
Caphead bolts & washers
6mm Allen key
Fig 26
D1
Fig 28
D3
Fig 30