Axminster WS1000TA User Manual page 15

Step 4
Guide Assembly
Locate the guide arm (E1) and slide it through the mounting bracket (D3), with two thirds extending out for the
front of the guard, clamp in place using the M8 clamping knob (E2) and lift and shift handle (E3) (Se e figs 31-32).
Locate the feeder roller assembly (E4) and slide it onto the guide arm (E1), clamp in place using the clamping
knob (See fig 33). Locate the anti-kickback assembly (E5) and repeat as before (See fig 34). (NOTE: Make sure
metal wave plate is facing inwards)
Fig 31
Slide the guide arm (E1) through the mounting
bracket (D3)
Fig 33
Slide on the guide roller assembly (E4) and
clamp in position
D3
E1
E4
E3
E2
Clamp the guide arm with the clamping knob
(E2) and lift and shift handle (E3)
E5
Slide the anti-kickback assembly (E5) and
clamp in position
Assembly
Fig 32
Fig 34
Continues Over....
15