Setting The Interface; Offline Operation - Avery Dennison AP7.t User Manual

12/08 Rev. 5.01-01
•
•
•
•
USER MANUAL
Memory: 8 MB
Flashcard: 32 MB
OFFLINE 0 JOBS
Initialisation
ONLINE 0 JOBS Online mode. The unit is ready for printing.
When the parameter
printer switches directly to offline mode when turned on.
CAUTION! - Wait at least 10 seconds between switching the device off
and on again, otherwise any modified parameter settings are not saved.

Setting the interface

By factory default, the AP 7.t is set for data transfer via the Centronics
interface. Print data can also be transferred via the RS232, USB or Ethernet
interface.
The interface type is selected with the following parameter:
INTERF. PARAM. > EASYPLUGINTERPR > Interface
For further information on how to set parameters, see
Parameters, "Using the Parameter Menu".
Part numbers for network and data cables can be found in Accessories.
Notes on how to use the Ethernet interface can be found in
Advanced Applications.

Offline operation

Switching from offline mode to online mode:
OFFLINE x JOBS
Switch to online mode when the print job is stopped:
OFFLINE x JOBS
Stopped xx
Slow material and ribbon feed:
OFFLINE x JOBS
Material travels backwards under the printhead:
OFFLINE x JOBS
AP 7.t
Internal RAM (here: 8 MB)
Optional RAM on the CompactFlash card (here: 32
MB) – only displayed when a CompactFlash card is
in use.
Offline mode
SYSTEM PARAMETER > Active Mode
Online
Online
Online Feed
Cut Online
Commissioning & Operation
is set to "Offline", the
Info-Printouts and
ONLINE x JOBS
ONLINE x JOBS
Stopped xx
OFFLINE x JOBS
feeding...
OFFLINE x JOBS
feeding...
13