Printer Connections - Avery Dennison AP7.t User Manual

12/08 Rev. 5.01-01 USER MANUAL

Printer connections

CAUTION! Add-on devices of an inferior quality may damage the printer!
Connect the printer only to devices that fulfil SELV (safety extra-low
voltage) circuit requirements acc. to EN 60950!
Only connect OEM devices.
Notes on how to use the network connection can be found in
Applications.
Optional: Serial interface
RS232 or RS422/485, contained
on the optional
I/O board.
Power switch
Turns the printer on/off.
[6] Back of the AP 7.t with the optional I/O board
AP 7.t
Optional: Signal interface
4 inputs / 3 outputs, contained
on the optional
I/O board.
Commissioning & Operation
Advanced
Keyboard connection
In standalone mode, the
keyboard can be used for data
input and print job selection.
Centronics interface
For parallel transfer of print
data.
USB interface
For serial transfer of print data.
Card slot
For CompactFlash cards –
used for storing fonts, logos,
graphics, etc.
RS232 interface
For serial transfer of print data.
Status LED/Ethernet
Ethernet interface
To connect to an "Ethernet 10/
100 Base T" network.
Power supply connector
Connection to the mains power supply
using the power cable provided.
7