Setting The Realtime Clock - Avery Dennison AP7.t User Manual

12/08 Rev. 5.01-01
Inserting a CF 1. Switch off the printer. Wait for 5 seconds.
card
2. Insert the CF card [11A] completely into the card slot, contact side first. The
1. Navigate to the
2. To enter the date and time, use the Cut button to shift the cursor, the Feed
USER MANUAL
card's label is on the right side.
Push the CF card into the slot until the release button [11B] comes out.
The inserted card will sit flush with the back wall of the housing.
The differently sized guide notches [10] of the CF card prevent the card
from being inserted wrongly. For the card to be inserted correctly, the wider
guide notch needs to be on top.
[11] Inserting the CF card. If the CF card has been inserted correctly, it will sit flush with the
printer's back wall (right).
For more detailed information on how to use CF cards, please refer to the
Plugin Card Manual, Application, "CompactFlash Card".

Setting the realtime clock

The AP 7.t's realtime clock can be used, for example, to calculate and print
the expiry date of a perishable product.
This is how you set the realtime clock:
SYSTEM PARAMETER > Realtime Clock
Realtime clock
dd.mm.yyyy hh:mm
button to change the parameter, and the Online button to save it.
To find out how to set parameters, see
AP 7.t
A
dd = day, mm = month, yyyy = year, hh = hour,
mm = minute
Info-Printouts and
Commissioning & Operation
.
Parameters.
18
B