Product Description; Operating Parts Of The Ap 7.T - Avery Dennison AP7.t User Manual

12/08 Rev. 5.01-01

Product Description

Control panel
LCD display, 4 buttons. Displays
printer operating mode and
parameter settings.
Connection for additional
devices
Optional devices such as a
cutter, rewinder or textile cutter
stacker (TCS) can be connected
here.
Setting knob for
printhead pressure
To adjust the printhead
pressure to the roller
width.
Ribbon rewinding
mandrel
Holds the take-up roll onto
which used ribbons are
rewound.
Ribbon unwinding
mandrel
Holds the new ribbon roll.
Flange mount for optional
devices
Use this to mount a cutter,
dispenser or TCS. To do this,
remove the plastic cover.
USER MANUAL

Operating parts of the AP 7.t

[4] Exterior view of the AP 7.t
[5] Operating parts of the AP 7.t
AP 7.t
Tear-off edge
The simplest way to cut tagstock or self-adhesive
stock (if no cutter is used). Note that textile
material can only be cut with the TCS.
Commissioning & Operation
Front cover
Open to insert material and
ribbon.
Window
Allows material/ribbon supply
checking without opening the
front cover.
Braking brush
Tensions the material (textile
material).
Adapter rings
To adjust the dispenser to
the core diameter of the
material roll.
Guide plate
Prevents the material roll
from slipping sideways.
Material dispenser
The label material roll is
inserted here.
Material brake
This ensures the proper material
tension under the printhead.
6