Trane IntelliPak Signature Series Programming Manual page 74
Commercial self-contained signature series, 20-80 ton modular series, 20-35 ton, “ao” and later design sequence
Hide thumbs
Also See for IntelliPak Signature Series:
- Installation, owner, and diagnostic manual (109 pages) ,
- Programming manual (52 pages)
Table of Contents
Advertisement
74
Programming
The following screen will appear sequentially.
Log 1
______________________________
Possible Values:
Press the CANCEL key to clear the diagnostics and prompt the following screen.
Diagnostic Log Is Password Protected
Please Enter Password:
Possible Values:
1. Press the + (Plus) or - (Minus) keys to enter the password.
2. Press the ENTER key to confirm. After entering the correct password, the following
screen will display.
Active Diagnostics
Please Wait, Updating Diagnostic Log
Possible Values:
Manual, Auto, or Info
If the DIAGNOSTIC LOG is empty when the CANCEL key is pressed, the following
screen will display.
Active Diagnostics ---- Info
Diagnostic Buffer Is Already Empty!
Possible Values:
Manual, Auto, or Info
Press the AUTO or STOP key to return to the top level status screen.
DIAGNOSTICS
_________________
Log Number 1-20
Viewed or Not Viewed
Active or History
Manual
Auto
Info
or any diagnostic listed under the previous screens
associated with the diagnostic type, including VOM
activated mode
_____________________
+ (Plus) and - (Minus)
_________________________
PKG-SVP01B-EN
Hide quick links:
Advertisement
Table of Contents
