Trane IntelliPak Signature Series Programming Manual page 38
Commercial self-contained signature series, 20-80 ton modular series, 20-35 ton, “ao” and later design sequence
Hide thumbs
Also See for IntelliPak Signature Series:
- Installation, owner, and diagnostic manual (109 pages) ,
- Programming manual (52 pages)
Table of Contents
Advertisement
38
Programming
End of Submenu (NEXT) to Enter SETUP
1. Pressing the NEXT key will display the following screen.
(On all water-cooled units and all units with a waterside economizer)
Water Flow Control Setup Submenu
Press ENTER to Review or Adjust
1. Pressing the NEXT key will display the following screen.
(On all water-cooled units and all units with a waterside economizer)
Periodic Water Purge Function:
Interval:
1 Hr
Possible Values:
1. Pressing the NEXT key will display the following screen.
(On all water-cooled units and all units with a waterside economizer)
Water-Flow Init Time Delay:
Time To Establish Water Flow Before Diag
Possible Values:
1. Pressing the NEXT key will display the following screen.
(On all water-cooled units and all units with a waterside economizer)
Temp Stablization Time Delay:
Water Flow Time For Valid Temp Readings
Possible Values:
1. Pressing the NEXT key will display the following screen.
(On all water-cooled units)
Head Pressure Control Inactive Min:
Head Pressure Control Active Min:
Possible Values:
1. Pressing the NEXT key will display the following screen.
SETUP
ENABLED
Duration:
1 Min
Enabled, Disabled
Interval = 1-999 Hrs
Duration = 1-9 Min
1 Min
0-20 Min
1 Min
0-20 Min
1 0 %
30 %
0-100%
PKG-SVP01B-EN
Hide quick links:
Advertisement
Table of Contents
