Trane IntelliPak Signature Series Programming Manual page 29

PKG-SVP01B-EN
Programming
(On models SCWF/SIWF 42-80 tons or SCRF/SIRF 50-60 tons only)
Compressor Module Ckt 3
Evap Temp 72.0
1. Pressing the NEXT key will display the following screen.
(On models SCWF/SIWF 65-80 tons only)
Compressor Module Ckt 4
Evap Temp 72.0
1. Pressing the NEXT key will display the following screen.
End of Submenu (NEXT) to Enter SETUP
1. Pressing the NEXT key will display the following screen.
Misc Input Status Submenu
Press ENTER to View Data in This Submenu
1. Pressing the NEXT key will display the following screen.
RTM Supply Airflow Proving Input:
Possible Values: Flow, No Flow
1. Pressing the NEXT key will display the following screen.
(On units when minimum position pot is assigned to function)
RTM Remote Min Position Pot Input
Possible Values: 0-100%
1. Pressing the NEXT key will display the following screen.
(On units with IGV or VFD, or units without IGV or VFD and supply air
pressure is present)
RTM Supply Air Pressure Input
1. Pressing the NEXT key will display the following screen.
(On units with an airside economizer only)
Active Outside Air Humidity
Possible Values: 0-100%
1. Pressing the NEXT key will display the following screen.
STATUS
Sat Cond Temp 87.0 F
Sat Cond Temp 87.0 F
FLOW
0 %
2.1 IWC
30 %
29