Trane IntelliPak Signature Series Programming Manual page 59
Commercial self-contained signature series, 20-80 ton modular series, 20-35 ton, “ao” and later design sequence
Hide thumbs
Also See for IntelliPak Signature Series:
- Installation, owner, and diagnostic manual (109 pages) ,
- Programming manual (52 pages)
Table of Contents
Advertisement
PKG-SVP01B-EN
Programming
(On units with an airside economizer)
Reference Enthalpy:
When OA Enthalpy is Below:
Factory Presets: 25 BTU/LB
Possible Values:
19-28 BTU/LB
1. Pressing the NEXT key will display the following screen.
(On units with an airside economizer)
Supply Air Low Limit - Modulate Economizer
Toward Min Pos if SA Temp Below:
Factory Presets: 50 F
Possible Values:
40-65 F
1. Pressing the NEXT key will display the following screen.
(On units with an airside economizer)
Default OA Damper Min Position:
Factory Presets: 15%
Possible Values:
0-100%
1. Pressing the NEXT key will display the following screen.
(On units with an airside economizer, OA cfm compensation, and IGV or VFD
or on units without an economizer, with IGV or VFD, and a VCM)
Default OA Damper Min Position:
with IGV/VFD Command at Minimum (0 %)
Factory Presets: 15%
Possible Values:
0-100%
1. Pressing the NEXT key will display the following screen.
(On units with an airside economizer, OA cfm compensation, and IGV or VFD
or on units without an economizer, with IGV or VFD, and a VCM)
Default OA Damper Min Position:
with IGV/VFD Command at Maximum (100 %)
Factory Presets: 10%
Possible Values:
0-100%
1. Pressing the NEXT key will display the following screen.
(On units with a VCM)
Default Minimum OA Flow Setpoint:
Min OA Flow Deadband:
Possible Values:
Setpoint = 0-max unit airflow
Deadband = 5.0-20 CCFM
1. Pressing the NEXT key will display the following screen.
SETPOINT
Enable Air Econ
25 BTU/LB
50 F
15 %
15 %
10 %
40 CCFM
10.0 CCFM
59
Hide quick links:
Advertisement
Table of Contents
