Advertisement
Quick Links
Introducing the USB 2.0+Firewire+10/100
The USB 2.0+Firewire+10/100 Combo design adds USB 2.0,
FireWire (1394a), and 10/100 (RJ45) Ethernet interfaces to
your system.
Features and Benefits
USB 2.0 interface:
•
Adds two external and one internal USB 2.0 ports
•
Compliant with USB specification rev. 2.0
•
Supports high-speed (480 Mbps), full-speed (12
Mbps), and low-speed (1.5 Mbps) data transfer
modes for simultaneous operation of multiple USB
2.0/1.1 devices
•
Hot-swapping feature allows you to connect/
disconnect devices without powering down your
system
•
Works with a various type of USB devices including
hubs, removable drives, digital cameras, scanners,
CD-RWs, DVD-ROMs, PC video cameras, printers,
CF/SM/MMC/SD/Memory Stick memory card
readers, and more...
Note: USB 1.1 devices are limited to USB 1.1 speeds
even when they are connected to USB 2.0 host adapter
or USB 2.0 hubs.
FireWire (1394a) interface:
•
Adds one external and one internal FireWire (1394a)
ports
04-0279B
USB 2.0+FireWire+10/100
Quick Installation Guide
1
Advertisement
Related Manuals for SIIG JU-2NE012
Summary of Contents for SIIG JU-2NE012
- Page 1 USB 2.0+FireWire+10/100 Quick Installation Guide Introducing the USB 2.0+Firewire+10/100 The USB 2.0+Firewire+10/100 Combo design adds USB 2.0, FireWire (1394a), and 10/100 (RJ45) Ethernet interfaces to your system. Features and Benefits USB 2.0 interface: • Adds two external and one internal USB 2.0 ports •...
- Page 2 • Compliant with IEEE 1394-1995, P1394a-2000 and OHCI 1.1 standards • Supports serial bus data transfer rates of 100, 200 and 400 Mbps • Hot-swapping feature allows you to connect/ disconnect devices without powering down your system • Works with various types of 1394 devices including DV camcorders/cameras, hard disk drives, CD-RWs, DVD-ROMs, removable drives, scanners, and other audio/video devices...
-
Page 3: Hardware Installation
Layout FireWire USB 2.0 FireWire 10/100 Ethernet Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. -
Page 4: Driver Installation
Replace the slot bracket's holding screw to secure the card. Replace the computer cover and reconnect the power cord. Driver Installation This sections provides information on how to install the USB 2.0+Firewire+10/100 drivers Windows 98SE Boot up Windows. At the Add New Hardware Wizard, click Cancel. - Page 5 11. Click Next and Finish. 12. Click No when asked to restart. 13. At the Add New Hardware Wizard, click Next. 14. Select Search for the best driver... and click Next. 15. Uncheck all boxes and click Next. 16. Select The Updated Driver (Recommended) and click Next.
- Page 6 Windows 2000 If you have Windows 2000 with Service Pack 4 (SP4) or later, the drivers will be installed automatically by the operating system. No additional driver installation is needed. Otherwise, follow the instructions in the order in which they appear. Boot up Windows.
- Page 7 When Windows resumes, at the Found New Hardware Wizard, select Install the software automatically (Recommended), then click Next. Click Continue Anyway and Finish. Repeat steps 5-6 one more time to complete the installation. Windows Server 2003 Windows Server 2003 automatically detects and installs the correct drivers for the USB 2.0+FireWire+10/100.
- Page 8 Double click 1394 Bus Controller or IEEE 1394 Bus host controllers option and an OHCI Compliant IEEE 1394 Host Controller should be displayed. Double click Network Adapters and a Realtek...Fast Ethernet should be displayed.
-
Page 9: Technical Support And Warranty
A lifetime manufacturer warranty supplied with this product is offered by SIIG, Inc. Please see SIIG website for more warranty details. If you should happen to encounter any problems with this product, please follow the procedures below. - Page 10 Fremont, CA 94538-3152 USB 2.0+FireWire+10/100 Combo is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective companies.