Sfp Leds; Figure 13. Sfp Leds - X600-24 Port Switch - Allied Telesis x600-48Ts Installation Manual
X600 series layer 3 gigabit ethernet switches
Hide thumbs
Also See for x600-48Ts:
- Software reference manual (1808 pages) ,
- Installation manual (72 pages) ,
- Installation manual (112 pages)
Table of Contents
Advertisement
Chapter 1: Overview
SFP LEDs
34
Table 3. Non-PoE Switch Base-T LED Descriptions (Continued)
LED
Function
Power over
Ethernet
2
PoE
Status
The Duplex Mode and Collisions LED is present on all the x600 switches
1.
except for the x600-24Ts-POE switch.
The PoE LED is only present on the x600-24Ts-POE switch.
2.
There is one LINK/ACTIVITY LED for each SFP slot. The SFP LEDs for
the x600 24 port switches are shown in Figure 13. The SFP LEDs for the
x600 48 port switches are shown in Figure 14 on page 35. The LED
definition are given in Table 4 on page 35
Figure 13. SFP LEDs - x600-24 Port Switch
State
Off
There is no powered device detected.
Solid
The end-node is a powered device
Green
and the port is providing power to it.
Solid
The port is experiencing a problem
Amber
providing PoE to the end-node.
Flashing
The port is connected to a powered
Amber
device but providing power to it would
exceed the maximum PoE power
budget of the switch.
SFP
L/A
21
22
23
24
161
45
SFP
47
46
48
L/A
1618
LINK/ACT LEDs
Description
Advertisement
Table of Contents
