Xfp Transceiver Slots; Figure 7. Xfp Transceiver - Allied Telesis x600-48Ts Installation Manual

XFP Transceiver Slots

The x600-24Ts/XP and the x600-48Ts/XP Switches have two slots for
optional XFP 10 Gigabit Ethernet transceivers that you can use to connect
high speed, 10 gigabit devices to the switch or to create high speed
backbone networks between switches. Figure 7 shows an example of an
XFP transceiver.
Refer to "Installing an XFP Transceiver" on page 83 for the XFP
installation instructions.
Note
For a list of supported XFP transceivers, contact your Allied Telesis
sales representative.
x600 Series Layer 3 Gigabit Ethernet Switches Installation Guide
721

Figure 7. XFP Transceiver

29