P
L
RINTING ON
ETTERHEAD
You can print on letterhead stationary or preprinted forms
from any of the input trays. Keep the following
considerations in mind:
•
Letterhead must be printed with heat-resistant inks
which will not melt or vaporize when subjected to the
printer's fusing temperature of 400 F for 0.1 seconds.
•
Inks must be non-flammable.
•
Paper and ink must both be dry.
A
C
44
Chapter 5, Using Print Media
Follow these directions:
1. Load letterhead stationary or other preprinted paper into
Tray 1 printed side up (A).
2. Or load into Tray 2 or 3 printed side down (B). Adjust
the Width Guide properly.
3. Configure the paper source, type, and size within your
software application (C).
4. Print to the Main Output Tray (D).
B
D