Normal Setting Mode - Printing Out The Memory Switch Setting - NEC Pinwriter P2000/P2X User Manual

Normal Setting Mode
To print out the current 'memory switch settings, follow these Steps.
Load the continuous Paper into the Printer and enter the memory switch menumode.
Select the Paper loading method in the Option setting mode-
The Printer will enter the normal setting mode after selectinp the desired Paper
loading method in the Option setting mode, and print out the menu of the normal
seeting mode.
Press FEED/LOAD to surreund "F' (Group F "PRINT & RESET SETTINGS")
with the brackets ([ 1).
Press MODE twice. The Printer will print out the current memory switch settinss.
switch settings, press MODE. The Printer prints'the main menu of the normal
setting mode.
Turn the Printer off to quit the menu mode.
The following figure Shows the memory switch settings for the P2000 at the factory.
O P T I O N
A. PRINT tlO(K:
0. INIEkFACE
' The hex dump mode automatically
l
available only once when setting to [Enable] and
Printer, then tuming it on again.
Printing Out the Memory Switch Setting
PRINT DIRIXTICJN
CR FUNCTION
LF FUNCTIW
CENTRE PCs.
4 Distance from the top edge of the paper to the
l
NO 5KIP
C U DNLY.3
l
middle of the first print line.
when the current Paper Fading method is set
to [S/F] in the Option setting mode-