Table of Contents
Advertisement
Displayed Image Status Message
Tray 1 Empty
Paper Mismatch in
Tray 1
Load Paper into
Tray 1
Output Tray Full
Tray 2 Paper
Mismatch
Tray 3 Paper
Mismatch
Warming Up
Insert Tray 2
110
Appendix D, The Status Monitor
Corrective Action
Fill Tray 1 (Multipurpose
Tray) with paper.
Configure the Operator
Panel so the printer can use
the paper size installed in
Tray 1 (Multipurpose
Tray).
Add paper to Tray 1
(Multipurpose Tray).
Remove paper from output
Output Tray.
Configure the Operator
Panel so the printer can use
the paper size installed in
Tray 2 (550-sheet
Cassette).
Configure the Operator
Panel so the printer can use
the paper size installed in
Tray 3 (500-sheet 2nd
Cassette).
Wait until the Ready
message appears. The
printer will process print
jobs after reaching
operating temperature.
Assure Tray 2 (550-sheet
Cassette) is completely
inserted in the printer.
Displayed Image Status Message
Insert Tray 3
Invalid Cartridge
Check parallel cable.
†
The "Check parallel cable" message will also appear
when the printer is busy processing a print job that is
being received from an interface other than the parallel
port. For example, if print job is being received through
an Apple LocalTalk or IrDA interface, the printer will
delay the job using the parallel port until the one using
the other interface is completed.
Corrective Action
Assure Tray 3 (500-sheet
2nd Cassette) is
completely inserted in the
printer.
Replace existing toner
cartridge with a
SuperScript 1400 Series
Toner Cartridge, Order #
xx-xxx. To order a new
one, call 800-632-2326.
Assure the parallel cable is
†
securely connected.
Advertisement
Table of Contents
