Table of Contents
Advertisement
P
E
RINTING
NVELOPES
You can print envelopes from any tray. Shown below are
directions for printing envelopes from Tray 1 (Multipurpose
tray). Use only undamaged envelopes that are recommended
for laser printers.
1.
Open Tray 1 and pull out the tray extender (A).
2.
Open and extend the Face-up Output tray in back of the
printer (B).
3. Scuffle the envelope stack (C).
A
note:
Do not load any more than
10 envelopes from Tray 1.
D
4.
Load envelopes flap side down against the left tray edge
(D). The stamp area is on the left side of the envelope and
it enters Tray 1 first.
5.
Adjust the Width Guide to the envelope stack (E).
6.
Configure the paper source, type and size in your
application, see page xx (F).
7.
After printing, close Tray 1.
B
E
Width Guide
C
F
Printing Envelopes
41
Advertisement
Table of Contents
