Chapter 3: Getting Started; Unpacking And Inspection; Figure 3-1 Typical Printer Accessories - Microcom 485TC Operator's Manual

Direct thermal printer

Hide thumbs Also See for 485TC:

Table of Contents

Chapter 3:

Getting Started

3.1

The printer has been packaged in protective foam to help reduce the damage during

shipment.

Inspect the shipping container(s) for signs of damage. If damage is evident, contact the

shipping company immediately to file a damage claim.

After the printer is removed from the container(s), verify that all the items on the packing list

are present and in good condition. The picture below (See Figure 3-1) shows a 438TC and

optional power cord. Your shipment may contain different items.

The foam and shipping container(s) should be kept and used if the printer is to be shipped

at a later time. Additional shipping materials can be ordered by contacting the Microcom

Corporation Service Department.

Figure 3-1

Typical Printer Accessories

485TC Operator's Manual - 880058-0100

3-1

Table of Contents

Chapters

Table of Contents

Do you have a question about the 485TC and is the answer not in the manual?