DME Designer
DME Designer
The DME Designer software application, supplied with the DME64N/24N, can be used to create configurations as well as
control the entire area.
A DME64N/24N network system cannot be set up entirely from the DME64N/24N alone. Configurations and scene data
must be created on a computer running the DME Designer application, and then transferred from the computer to the
DME64N/24N. The DME Designer can also be used to determine how external controllers will control DME64N/24N
parameters.
Refer to the DME Designer Installation Guide for detailed information on connecting a computer to the DME64N/24N and
installing the required software drivers.
Refer to the DME Designer Owner's Manual for setup and operation instructions. The PDF manual will automatically be
copied to the computer when the DME Designer application is installed.
15
DME64N/24N Owner's Manual