Yamaha DME64N Owner's Manual page 57

5 [F5] Button
When the Main display is showing this button calls the Parameter Edit display for the middle user-defined
parameter in the lower part of the display.
When the Utility display is showing it has the same function as the [
6 [F6/MUTE] Button
When the Main display is showing this button calls the Parameter Edit display for the user-defined parameter
in the lower right corner of the display.
If this button is pressed and held for more that 2 seconds the Mute display will appear.
7 [HOME] Button
Directly recalls the home (main) display. If pressed while the main display is showing the [HOME] button
steps through the user-defined parameter display pages (page 42).
8 [SCENE] Button
Calls the scene recall display (page 43). Calls the scene store confirmation display if pressed and held from
longer than 2 seconds (page 43). The indicator will light green while the scene recall/store display is showing.
9 [CANCEL] Button
Closes the window on the display.
) [ENTER] Button
Confirms and enters a value or setting.
! Display
Displays scene information and device parameters.
@ Dial
Adjusts the value of selected parameters. The ICP1 dial functions in the same way as the DME64N/24N dial.
ICP1 Installation
Please have the ICP1 installed by a Yamaha-qualified contractor. Consult your Yamaha representative.
CAUTION
1.
Connect the control panel unit and the ICP1 adaptor box.
Use an Ethernet "straight" cable.
• Do not use a "cross" cable to connect the control panel unit and adaptor box. Also do not use joint connectors,
cross cable converters, or other extension adaptors.
WARNING
• Connect ct the control panel unit and adaptor box directly, not via a hub.
• For maximum safety be sure to securely connect the ICP1 earth screw to an earth connection.
CAUTION
] cursor button on the DME64N/24N.
Control panel unit
Earth screw
DME64N/24N Owner's Manual
Options
57