Appendix; Options; Icp1 - Yamaha DME64N Owner's Manual

Options

Appendix

Options
The ICP1, CP4SW, CP1SF, and CP4SF controllers are optionally available for remote external control of the DME64N/
24N. The ICP1 connects via Ethernet, while the CP4SW, CP1SF, and CP4SF connect via the GPI interface.

ICP1

This controller connects to the DME64N/24N via Ethernet. Like the DME64N/24N, each ICP1 unit has it's
own IP address. With a display that replicates the display on the DME64N/24N, the ICP1 allows
comprehensive, familiar control from remote locations.
ICP1 Controls
1 [F1] Button
When the Main display is showing this button calls the Parameter Edit display for the user-defined parameter
in the upper left corner of the display.
When the Utility display is showing it has the same function as the [E] cursor button on the DME64N/
24N.
2 [F2] Button
When the Main display is showing this button calls the Parameter Edit display for the middle user-defined
parameter in the upper part of the display.
When the Utility display is showing it has the same function as the [
3 [F3] Button
When the Main display is showing this button calls the Parameter Edit display for the user-defined parameter
in the upper right corner of the display.
When the Utility display is showing it has the same function as the [F] cursor button on the DME64N/
24N.
4 [F4/UTILITY] Button
When the Main display is showing this button calls the Parameter Edit display for the user-defined parameter
in the lower left corner of the display. If this button is pressed and held for longer than 2 seconds when the
Main display is showing the Utility display will appear. Pressing the [F4] button while the Utility display is
showing sequentially steps through the various Utility pages.
56
DME64N/24N Owner's Manual
1 2 3
!
4 5 6
7 8
@
9 )
] cursor button on the DME64N/24N.